background image

Positioning and connecting       

en

33

2.

Unscrew and remove all four 

transport brace screws.

Remove the sleeves. To do this, 

remove the mains cable from the 

holders. 

3.

Fit the covers. Lock the covers firmly 

in place by applying pressure to the 

snap-in hooks.

Hose and cable lengths

Left-hand connection

Right-hand connection

Tip:  

The following are available from 

specialist dealers/the after-sales 

service:

An extension for Aqua-Stop or cold 

water supply hose (approx. 2.50 m); 

order no. WMZ2380, WZ10130, 

CZ11350, Z7070X0

A longer supply hose (approx. 

 2.20 m) for standard model

Water inlet

:

Warning

Danger of death!

There is a risk of electric shock if you 

touch live components.

Do not immerse the Aqua-Stop safety 

valve in water (it contains an electric 

valve).

Observe the following when connecting 

the machine:

Notes

Only operate the washing machine 

using cold mains water.

Do not connect the machine to the 

mixer tap of an unpressurised hot-

water boiler.

Do not use a used supply hose. Only 

use the supply hose supplied or one 

that was purchased from an 

authorised specialist retailer.

Do not bend, squash, modify or cut 

through the water supply hose 

(otherwise its strength is no longer 

guaranteed).

PD[FP

aFP

aFP

aFP

aFP

PD[FP

aFP

aFP

Summary of Contents for WAK2020SGC







































Reviews: