en
Troubleshooting
48
Fault
Cause
troubleshooting
The programme does not
start.
Λήξη σε
is activated.
▶
Check whether
Λήξη σε
is activ-
ated.
Laundry is caught in the
door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press
Έναρξη / Προσθήκη
ρούχων
to start the programme.
The door cannot be opened. – –– is activated.
▶
Continue the programme by select-
ing
Στύψιμο
or
Άντληση
and
pressing
Έναρξη / Προσθήκη
ρούχων
.
the programme status is Rinse
Hold", Page 36
The temperature is too high.
▶
Wait until the temperature has
dropped.
▶
Water level is too high.
▶
Start the
Άντληση
programme.
Power failure.
▶
Open the door using the emergency
release.
The water is not draining.
Drain pipe or water outlet
hose is blocked.
▶
Clean the drain pipe and the water
outlet hose.
Drain pipe or water drain
hose is caught or jammed.
▶
Ensure that the drain pipe and wa-
ter drain hose are not kinked or
trapped.
Drain pump is blocked.
▶
– –– is activated.
▶
Continue the programme by select-
ing
Στύψιμο
or
Άντληση
and
pressing
Έναρξη / Προσθήκη
ρούχων
.
the programme status is Rinse
Hold", Page 36
The water outlet hose is con-
nected too high.
▶
Install the water outlet hose at a
maximum height of 1 metre.