en
Operating the appliance
34
Switch the appliance on again if
necessary. The
è
and
Ø
symbols will
flash. If the symbols are off, the door
can be opened.
Cancel the programme
For programs at high temperature:
1.
Touch the control panel
A
.
2.
To cool the laundry: Select
Rinse
.
3.
And touch
A
again.
For programmes at low temperatures:
1.
Touch
A
.
2.
Select
Spin
or
Drain
.
3.
And touch
A
again.
Note:
When cancelling programmes
that use active oxygen, the door will
remain locked for up to 25 minutes until
there is no longer any active oxygen in
the drum.
Switch the appliance on again if
necessary. The
è
and
Ø
symbols will
flash. If the symbols are off, the door
can be opened.
Programme end during rinse
hold
The
A
indicator flashes in the display
panel, and the preset spin speed and
remaining programme length are
displayed for the selected programme.
Continue the programme by:
■
Touching
A
on the control panel or
■
Changing the spin speed and then
touching
A
or
■
Selecting the Easy-Iron
Q
setting
and then touching
A
or
■
Turning the programme selector to
Drain
and then touching
A
.
Programme end
End
lights up in the display panel and
the
A
and
è
displays are off.
Note:
If the
Û
display flashes, this
informs you to run the
Drum Clean
programme or any other programme at
a washing temperature of at least
60 °C.
Removing laundry/switching
off the appliance
1.
Open the loading door and remove
the laundry.
2.
Switch off the appliance.
3.
Turn off the tap.
Note:
Not required for AquaStop
models.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
Wipe the rubber gasket dry.
■
Leave the washing machine door
and detergent drawer open so that
any residual water can dry away.
■
Always wait for the end of the
programme, otherwise the appliance
may still be locked. Then switch on
the appliance and wait for it to
unlock.
Summary of Contents for WAT28799HK
Page 47: ...6 ...