Troubleshooting
en
51
Fault
Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
The programme does
not start.
You have not pressed
Inicio/Pausa + Carga
.
▶
Press
Inicio/Pausa + Carga
.
Door is not closed.
1.
Close the door.
2.
Press
Inicio/Pausa + Carga
to start the pro-
gramme.
Childproof lock is activated.
▶
"Deactivating the childproof lock", Page 40
Termin.
is activated.
▶
Check whether
Termin.
is activated.
Laundry is caught in the door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press
Inicio/Pausa + Carga
to start the pro-
gramme.
The door cannot
be opened.
– – – –
is activated.
▶
Continue the programme by selecting or and
pressing
Inicio/Pausa + Carga
.
"Resuming the programme when the programme
status is Rinse Hold", Page 39
The temperature is too high.
▶
Wait until the temperature has dropped.
▶
"Cancelling the programme", Page 39
Water level is too high.
▶
Start the programme.
Power failure.
▶
Open the door using the emergency release.
→
The water is not drain-
ing.
Drain pipe or water outlet hose is blocked.
▶
Clean the drain pipe and the water outlet hose.