background image

en

        Faults and what to do about them

44

Odours in the washing 

machine.

Depending on the model, run the 

Drum Clean

 Û

 90 °C

 or 

i

 Cottons 90 °C

 

program without laundry. 
Add washing powder or a detergent containing bleach.

Note:  

To prevent foaming, only use half the amount of detergent recommended 

by the detergent manufacturer. Do not use detergents designed for wool or del-

icates.

The 

Å

 symbol lights 

up in the display panel. 

Foam may also be leak-

ing from the detergent 

drawer.

Have you used too much detergent?
Mix one tablespoon of fabric softener with 1/2 litre of water and pour it into 

compartment 

II

 (not suitable for outdoor clothing, sportswear or items stuffed 

with down).
Use less detergent in the next wash cycle.

Loud noises, vibrations 

and machine "move-

ment" during the spin 

cycle.

Is the appliance aligned? Align the appliance 

~

 Page 17

Are the appliance's feet fixed? Secure the appliance's feet 

~

 Page 17

Have the transport braces been removed?  

Remove the transport braces 

~

 Page 14

The display panel/indi-

cator lights do not work 

while the appliance is 

running.

Has there been a power failure?

Have the fuses blown? Reset/replace the fuses.

If the fault occurs repeatedly, call customer services. 

There is detergent resi-

due on the laundry.

Some phosphate-free detergents contain water-insoluble residue.

Select 

à 

Rinse

 or brush the laundry after washing.

The 

Õ

 symbol lights up 

in the display in pause 

mode.

Door is locked due to safety reasons (water level and/or temperature are 

too high). It is not possible to add laundry. Close the door immediately, if 

necessary.

Press the 

A

 Start/Reload button to continue the program.

If you cannot rectify a fault yourself (after switching the machine off and on again) or a repair is required:

Switch off the appliance and pull out the mains plug. 

Turn off the tap and call customer services.

Faults

Cause/Remedy

Summary of Contents for WAU28460ID

















































Reviews: