background image

Installation and connection

 en

15

2.

Connect the water inlet hose to a
tap (26.4 mm = 3/4").

 

 

 

 

3.

When connecting to a 21 mm = ½"
tap, first fit the adapter with a seal-
ing washer.

4.

Open the water tap carefully and
check that the connection points
are tight.

Water outlet connection types

This information is intended to help
you to connect this appliance to the
water outlet.

ATTENTION!

When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.

Secure the water outlet hose
against unintentional loosening.

Note: 

Observe the draining heights.

The maximum draining height is
100 cm.

Siphon

Secure the con-
nection point with
a (24–40 mm)
hose clamp.

Sink

Fix and secure
the water outlet
hose with an el-
bow
→ 

Page 30

.

Plastic pipe with
rubber sleeve or
gully

Fix and secure
the water outlet
hose with an el-
bow
→ 

Page 30

.

4.6 Aligning the appliance

In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.

1.

Loosen the lock nuts using a WAF
17 wrench by turning it in a clock-
wise direction.

Summary of Contents for WAU28PB0SN

































































Reviews: