background image

Troubleshooting

 en

63

Fault

Cause

troubleshooting

Insufficient cleaning.

Detergent or care products
have congealed in dis-
pensers of the intelligent
dosing system.

1.

Check whether the detergent used
is suitable. 

→ 

"Detergents and care products",

Page 38

2.

Drain the dispenser. 

→ 

"Cleaning the detergent drawer",

Page 46

3.

Clean the dispenser.

4.

Refill the dispenser. 

→ 

"Filling the dispenser", Page 43

Unsuitable detergent added
to the dispenser of the intelli-
gent dosing system.

1.

Check whether the detergent used
is suitable. 

→ 

"Detergents and care products",

Page 38

2.

Drain the dispenser. 

→ 

"Cleaning the detergent drawer",

Page 46

3.

Clean the dispenser.

4.

Refill the dispenser. 

→ 

"Filling the dispenser", Page 43

Leakage

Fault

Cause

troubleshooting

Water is leaking out at the
water inlet hose.

Water inlet hose is not cor-
rectly/securely connected.

1.

Connect the water supply hose cor-
rectly. Connecting the water inlet
hose

2.

Tighten the screw connection.

Water is leaking out at the
water outlet hose.

The water outlet hose is
damaged.

Replace the damaged water outlet
hose.

Water outlet hose is not con-
nected correctly.

Connect the water outlet hose cor-
rectly. Water outlet connection
types

Odours

Fault

Cause

troubleshooting

Odours have formed in the
appliance.

Humidity and detergent
residue may promote the
formation of bacteria.

→ 

"Cleaning the drum", Page 46

If you are not using the appliance,
leave the door and detergent
drawer open so that residual water
can evaporate.

Summary of Contents for WAU28PS9SN









































































Reviews: