Set up and connectNL
2.
Loosen and remove all bolts of the 4
transport locks with a SW13 open-
end wrench
†
5.
Install the 4 cover caps.
6.
Push the 4 cover caps down.
3.
Remove the mains connection cable from
the holder.
4.5 Connecting the device
4.
Remove the 4 sleeves.
Connect water supply hose
WARNING
Risk of electric shock!
The device contains live parts.
Touching live parts is dangerous.
▶
Do not immerse the electric
Aquastop valve in water.
15