ServiceNL
2.
Push the dosing aid forward.
4.
Slide the detergent drawer into the
appliance.
13.9 Starting the program
Remark:If you want to change the time
until the program end, first set the
ready in time.
▶
Press.
aThe drum rotates and a
load recognition takes place, which
can take up to 2 minutes, after
which the water flows into the
device.
aThe display shows whether the program
maduur or the ready in time
displayed.
aAfter the program end, it shows
display: End.
3.
Fold the dosing aid downwards and
click into place.
13.10 Adding laundry
1.
Press .
The device pauses.
Remark:When
it is not possible to add laundry.
appears
4.
Slide in the detergent drawer.
When
laundry possible.
goes out, then the refill
13.8 Dosing detergent and care
agent
2.
Open the appliance door.
3.
Reload or remove the laundry.
4.
Close the appliance door.
5.
Press .
Comments
†Use the dosing aid for liquid
Do not use with gel-like detergents,
washing powder, switched on
prewash or ready-in time. †Keep the
directions for washing
13.11 Program Cancel
1.
Press.
2.
Open the appliance door.
1.
Pull out the detergent drawer.
At high temperature and high
water level, the appliance door
remains locked for safety reasons.
– Start the program at a high
temperatureTo rinse.
2.
Fill with detergent.
3.
If desired, fill care
product.
and with a
33
