Cleaning and maintenanceNL
1.
As there may still be residual
water in the pump, carefully
unscrew the lid.
4.
Install the pump cover.
†
Check that the pump cover
components are correctly
assembled.
†
Large impurities can cause the
filter element to get stuck in the
pump housing. Loosen impurities
and remove filter element.
5.
Tighten the pump cover as far as
it will go.
2.
Clean the interior, screw thread of
the pump cover and pump
housing.
90°
The pump cover handle must
be vertical.
6.
Install and close the service door.
The pump cover consists of two
components that can be
disassembled for cleaning.
3.
Verify that the pump impeller rotates
easily.
2
1
41