TroubleshootingNL
Malfunction
"E:35 / -10"
Cause and Troubleshooting
Water in the bottom tray.
▶
Close the tap.
▶
Please contact customer service.
Device is leaking.
▶
Close the tap.
▶
Please contact customer service.
flashes.
The Voltage Control System detects an impermissible
voltage drop.
▶
No solution possible.
Remark:When the supply voltage has stabilized, the
program continues normally.
Undervoltage can cause a program extension.
No solution possible.
Detergent dosage is too high.
▶
Immediate measure: mix a tablespoon of fabric softener
with 0.5 l of water and pour this mixture into the left
compartment (not for outdoor, sportswear and down
textiles).
▶
Reduce the amount of detergent for the next wash
with an equal load.
burns.
Temperature is too high.
▶
Wait for the temperature to drop.
▶
Water level is too high.
▶
Select a suitable program for draining.
flashes.
Door is not closed.
1.
Close the door.
2.
To start the program, press
†
Laundry is wedged in the door.
1.
Open the door again.
2.
Remove trapped laundry.
3.
Close the door.
4.
To start the program, press
†
All other error codes.
Malfunction
▶
Please contact customer service.
45