Transport, storage and disposalNL
18.1 Emergency release
1.
Close the tap.
2.
Empty the water inlet hose.
3.
Turn off the device.
unlock door
Required:The drain pump is empty.
4.
Unplug the appliance from the
mains.
1. ATTENTION!Running water can
lead to material damage.
▶
Do not open the door if water can
be seen behind the glass.
5.
Let the suds drain.
pump", page 39
6.
Disassemble the hoses.
Pull the emergency release
downwards with the aid of a tool
and release it.
19.2 Installing transport locks
Secure the device before transport
with the transport locks to avoid
damage.
1.
Remove the 4 cover caps using a
screwdriver.
aThe door lock is unlocked.
2.
Place the service door and click it into
place.
3.
Close the service door.
Keep the cover caps.
19 Transport, on-
hit and drain
2.
Install the 4 transport locks. Keep
the description
†Remove transport locks", page
14and proceed in reverse order.
Here you will find an explanation of
how to prepare the device for
transport and storage. We also
explain how to dispose of old
appliances.
19.3 Recommissioning the
device
19.1 Dismantling the device
▶
For more information, see
†Before using for the first time",
Remark:More information can be found
clue
and the QR code
or on
m.
in the digital usage by
scanning v in the table
of contents
www.bosch-home.co
53