Troubleshooting
en
49
Fault
Cause
troubleshooting
The programme does not
start.
Door is not closed.
1.
Close the door.
2.
Press
Inicio/Pausa + Carga
to
start the programme.
Childproof lock is activated.
▶
Termin.
is activated.
▶
Check whether
Termin.
is activ-
ated.
Laundry is caught in the
door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press
Inicio/Pausa + Carga
to
start the programme.
The door cannot be opened.
– – – –
is activated.
▶
Continue the programme by select-
ing or and pressing
Inicio/
Pausa + Carga
.
the programme status is Rinse
Hold", Page 37
The temperature is too high.
▶
Wait until the temperature has
dropped.
▶
Water level is too high.
▶
Start the programme.
Power failure.
▶
Open the door using the emergency
release.
The water is not draining.
Drain pipe or water outlet
hose is blocked.
▶
Clean the drain pipe and the water
outlet hose.
Drain pipe or water drain
hose is caught or jammed.
▶
Ensure that the drain pipe and wa-
ter drain hose are not kinked or
trapped.
Drain pump is blocked.
▶
– – – –
is activated.
▶
Continue the programme by select-
ing or and pressing
Inicio/
Pausa + Carga
.
Summary of Contents for WAU28T40ES
Page 46: ...en Cleaning and servicing 46 2 1 ...
Page 59: ......