Basic operation
en
39
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.8 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
Start/Reload
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows:
-0-
.
13.9 Soaking laundry
You can soak the laundry before
washing in the appliance by pausing
the programme.
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
Start/Re-
load
.
3.
To resume the programme, after
the desired soaking time, press
Start/Reload
.
13.10 Adding laundry
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
1.
Press
Start/Reload
.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
Start/Reload
.
13.11 Cancelling the pro-
gramme
Once the programme has started,
you can cancel it at any time.
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
1.
Press
Start/Reload
.
2.
Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse
programme.
– If the water level is high: Start
the
Spin
or
Drain
pro-
gramme.
3.
Remove the laundry.
13.12 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1.
Set the
Spin
or
Drain
pro-
gramme.
2.
Press
Start/Reload
.