background image

Appliance settings    

en

41

Q

 Appliance settings

Appliance settings

You can change the following settings:

The volume of the buttons and 

information signals (e.g. at the end 

of the programme)

Select/deselect the appliance's 

automatic switch-off function. 

~

 Page 12

You will need to activate the setting 

mode in order to change these settings.

Activating the setting mode

1.

Press the 

#

 button.

The appliance is switched on and 

the 

i

 Cottons

 programme is shown 

at position 1.

2.

Press the 

Temperature 

s

 button and, 

at the same time, turn the 

programme selector clockwise to 

position 2. Release the button.

The setting mode is activated and the 

preset volume for the information 

signals appears in the display panel.

You can now change the settings:

Changing the signal volume

Use the 

Finished in 

ñ

 +

 or 

-

 button to 

change the following settings at the 

corresponding programme selector 

positions:

2: The volume of the information 

signals and/or 

3: The volume of the button signals. 

Exit setting mode or:

Selecting/deselecting the 

appliance automatic switch-

off

With the programme selector in position 

4, press the 

Finished in 

ñ

 +

 or 

-

 button 

to switch the "Automatic switch-off" 

function on or off.

Exiting setting mode

To exit and save the settings, press the 

#

 button.

The appliance is switched off. The 

selected settings will take effect the next 

time the washing machine is switched 

on.



3RVLWLRQV

0 = off, 1 = quiet, 

2 = medium, 3 = loud, 

4 = very loud

Summary of Contents for WAW28420AU

























































Reviews: