background image

en

    Overview of programmes

14

/

Overview of programmes

Overview of programmes

Programmes on the programme selector

Programme/type of laundry/information

Settings

Programme name

Brief explanation of the programme and for which fabrics it is 

suitable.

Max. load
Temperature that can be selected 

(

Ž

= cold)

Spin speed  that can be selected**; 

$

 = Rinse Stop, 

0 = no spin cycle, draining only
Other programme  

settings that can be selected

Cottons

Hard-wearing fabrics, heat-resistant fabrics made of cotton or 

linen

Notes

In the 

EcoPerfect

 setting, the washing temperature is lower 

than the selected temperature. If you would like to set a 

particular washing temperature, use the programme without 

the 

EcoPerfect

 setting or, if necessary, set a higher 

temperature.

The 

SpeedPerfect

 setting is suitable as a short programme 

for lightly soiled laundry.

Max. 8,5 kg/5* kg

Ž

 - 90 °C

$

, 0 - 1600** rpm

EcoPerfect, SpeedPerfect, 
Prewash,
Rinse Plus,
Easy Iron

Easy Care

Synthetic or blended fabrics

Max. 4 kg

Ž

 ... 60 °C

$

, 0 - 1200 rpm

EcoPerfect, SpeedPerfect, 
Prewash,
Rinse Plus,
Easy Iron

*  Reduced load for the 

SpeedPerfect

 setting

**  Max. spin speed, depending on the model

***  Programme, depending on the model

Summary of Contents for WAW28540AU













































Reviews: