WWW.BOSCH-HOMES.COM
Positioning and connecting
en
23
Transportation
E.g. when moving house
Preparatory work:
1.
Turn off the tap.
2.
Reduce the water pressure in the
supply hose:
; Cleaning
and maintenance – filter in the water
supply blocked
3.
Disconnect the washing machine
from the mains.
4.
Drain the remaining water:
maintenance – the drain pump is
blocked, emergency draining
5.
Remove the hoses.
Fitting the transportation securing
means:
1.
Remove the covers and keep them
in a safe place.
If required, use a screwdriver.
2.
Insert all four sleeves.
Clip the mains cable securely in the
holders. Insert the transportation
securing bolts and tighten them with
a wrench (WAF 13).
Before switching on the appliance
again:
Notes
■
The transport braces
must
be
removed.
■
Pour approx. 1 litre of water into
compartment
II
, select the
[
Drain
programme and start.
This will prevent detergent from
flowing unused into the drain during
the next wash.