background image

Home Connect    

en

49

o

Home Connect

Home Connect

This appliance is Wi-Fi-capable and can 

be remotely controlled using a mobile 

device.
You can use the Home Connect app to 

do the following on your appliance from 

your mobile device:

Set up programs and launch them.

Adjust, activate and deactivate 

program settings.

Query the status of programs.

Adjust, activate and deactivate 

appliance settings.

Switch off the appliance.

Before you can use the Home Connect 

functions, you will need to carry out the 

following steps:

1.

Install the Home Connect app on 

your mobile device.

2.

Register in the Home Connect app.

3.

Connect your appliance to your 

home network automatically 

or

 

manually (you only need to do this 

the first time).

4.

Connect your appliance to the Home 

Connect app.

You can find information about the app 

on our Home Connect website 

www.home-connect.com
Home Connect services are not 

available in every country. The 

availability of the Home Connect 

function depends on the availability of 

Home Connect services in your country. 

You can find information on this at: 

www.home-connect.com

Notes

Please observe the safety 

precautions in this instruction 

manual and make sure that these 

are complied with even when 

operating the appliance via the 

Home Connect app while you are 

away from home. You must also 

follow the instructions in the 

Home Connect app.

You cannot use the 

Home Connect app to make 

changes while the controls on the 

appliance are being operated. 

However, you can use the 

Home Connect app to see any 

adjustments made directly on the 

appliance itself.

Calling up the Home Connect 

menu

In the Home Connect menu, you can 

create and view network connections, 

reset network settings, activate/

deactivate Wi-Fi and find other Home 

Connect functions.

1.

Switch on the appliance.

2.

Press and hold 

Remote start

 

}

 for 

at least 3 seconds.

‘ž£

 appears in the display.

You are now in the Home Connect 

menu.

Note:  

Briefly press 

Remote start

 

}

 to 

exit the Home Connect menu.

Summary of Contents for WAWH26600W





































































Reviews: