Home Connect
en
47
Basic dosage
You can adjust the preset basic
dosages for liquid detergent and fab-
ric softener.
The basic dosage depends on the
manufacturer's instructions for the de-
tergent, the water hardness and the
degree of soiling of the laundry.
Always set a basic dosage that cor-
responds to the dosage for a stand-
ard load of 4.5 kg.
→
You can individually adjust the basic
dosages for each dispenser.
→
"Changing the basic settings",
Home Connect
Home Connect
This appliance is network-capable.
Connecting your appliance to a mo-
bile device lets you control its func-
tions via the Home Connect app, ad-
just its basic settings and monitor its
operating status.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
¡
"Connecting the appliance to a
WLAN home network (Wi-Fi) with
WPS function", Page 47
¡
"Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function", Page 48
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents sup-
plied by Home Connect.
¡
Please also follow the instructions
in the Home Connect app.
Notes
¡
Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→
¡
Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect set-
tings in the basic settings for your ap-
pliance. Which settings the display
shows will depend on whether
Home Connect has been set up and
whether the appliance is connected
to your home network.
Connecting the appliance to a
WLAN home network (Wi-Fi)
with WPS function
Using your router's WPS function is
the simplest way to connect the ap-
pliance to your home network.
Requirement:
If your router has a
WPS function, you can connect the
appliance to your WLAN home net-
work (Wi-Fi) automatically.
1.
Press and hold
Απομακρυσμένη έναρξη
for
approx. 3 seconds.
a
You are now in the Home Connect
menu.
2.
Select
Connect
.
3.
Confirm the message in the dis-
play.
4.
Press the WPS button on the
router within the next 2 minutes.