en
Basic settings
56
16.9 Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip:
For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com
16.10 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡
Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡
Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡
The current software and hardware
version of your appliance.
¡
Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note:
Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
Basic settings
17 Basic settings
Basic settings
You can configure the appliance to
meet your needs.
17.1 Overview of the basic
settings
Below is an overview of the basic set-
tings on the appliance.
Basic setting
Description
end signal
Set the volume of
the signal at the
end of the pro-
gramme.
button signal
Set the volume of
the signal emit-
ted when the but-
tons are pressed.
auto power-off
Deactivate the
"Automatic
switch-off" func-
tion for the appli-
ance or set the
time after which
the appliance
automatically
switches itself
off.
→
and conserve re-
sources",
Page 11
Note:
If Wi-Fi is
activated, the ap-
pliance will not
switch itself off
automatically.
Drum clean ad-
vice
Activate or deac-
tivate the re-
minder to clean
the drum.
Language
Set the language.
