Cleaning and servicing
en
47
3.
Ensure that both impellers can
turn.
4.
Insert the pump cap.
‒
Ensure that the parts of the
pump cap are correctly as-
sembled.
5.
Insert the pump cap and screw it
on as far as it will go.
90°
The handle on the pump cap must
be in a vertical position.
6.
Insert the maintenance flap and
lock it into place.
1
2
7.
Close the maintenance flap.
16.6 Cleaning the intake
opening in the rubber
gasket
Regularly check the intake opening
in the rubber gasket for any block-
ages and clean the intake opening.
1.
Open the door.
2.
Check the intake opening for
blockages and remove any block-
ages.
Note:
Do not use any sharp or poin-
ted objects.
16.7 Cleaning the water outlet
hose at the siphon
1.
Switch off the appliance.
Summary of Contents for WAX32MA9SN
Page 63: ......