en
Basic operation
42
5.
Adjust the programme settings if re-
quired.
a
The programme is saved.
Loading laundry
Notes
¡
Please read the safety information
→
to ensure that you use the
appliance safely.
¡
To prevent creasing, take note of the
maximum load for the relevant pro-
gramme →
Requirement:
Prepare and sort the
laundry.
→
1.
Open the door.
2.
Ensure that the drum is empty.
3.
Separate the laundry and place it in
the drum.
4.
Note:
Ensure that there is no laundry
trapped in the door.
Close the door.
Adding detergent and care
product
For programmes in which intelligent
dosing is not possible or desirable, you
can add detergent to the manual dos-
ing compartment.
Notes
¡
Please read the safety information
→
to ensure that you use the
appliance safely.
¡
The dosing recommendation is
aimed at the maximum load for the
programme.
Tip:
In addition to intelligent dosing,
you can also add additional care
product for laundry, e.g. stain remover,
starch or bleach, to the manual dosing
compartment. Do not add any addi-
tional detergent to the manual dosing
compartment to avoid overdosage
and/or foaming.
Requirement:
Find out the optimum
dosage for detergent and care product.
→
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
.
a
The drum rotates and load detection
takes place. This can take up to 2
minutes, after which water enters the
drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
Soaking laundry
You can soak the laundry before wash-
ing in the appliance by pausing the
programme.
Note:
No additional detergent is re-
quired. The soaking solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
.
