en
Installation and connection
16
2.
Remove the transport struts.
3.
Undo and remove the screws in the
horizontal transport strut using a T20
screwdriver.
4.
Remove the transport strut.
Connecting the appliance
Connect your appliance to the power
supply, water inlet and water outlet.
Connecting the water inlet hose
Note:
Please read the safety informa-
the appliance safely.
WARNING
Risk of electric shock!
The appliance contains live parts.
Touching live parts is dangerous.
▶
Do not immerse the electrical
AquaStop valve in water.
1.
Connect the water inlet hose to a tap
(26.4 mm = 3/4").
¾˝
min.
10 mm
2.
When connecting to a 21 mm = ½"
tap, first fit the adapter with a sealing
washer.