en
Troubleshooting
56
Fault
Cause and troubleshooting
Insufficient cleaning.
1.
Check whether the detergent used is suitable.
→
"Detergents and care products", Page 32
2.
Drain the dispenser.
→
"Cleaning the detergent drawer", Page 41
3.
Clean the dispenser.
4.
Refill the dispenser.
→
"Filling the dispensers", Page 35
HomeConnect is not
working correctly.
Different causes are possible.
▶
Go to www.home-connect.com.
No connection to the
home network.
Wi-Fi is switched off.
▶
"Activating Wi-Fi on the appliance", Page 39
Wi-Fi is activated but a connection to your home net-
work cannot be established.
1.
Ensure that the home network is available.
2.
Reconnect the appliance to the home network.
→
"Connecting the appliance to a WLAN home net-
work (Wi-Fi) with WPS function", Page 37
"Connecting the appliance to a WLAN home net-
work (Wi-Fi) without WPS function", Page 38
Water is leaking out at
the water inlet hose.
Water inlet hose is not correctly/securely connected.
1.
Connect the water supply hose correctly. Connect-
ing the water inlet hose
2.
Tighten the screw connection.
Water is leaking out at
the water outlet hose.
The water outlet hose is damaged.
▶
Replace the damaged water outlet hose.
Water outlet hose is not connected correctly.
▶
Connect the water outlet hose correctly. Water out-
let connection types
Odours have formed
in the appliance.
Humidity and detergent residue may promote the
formation of bacteria.
▶
▶
If you are not using the appliance, leave the door
and detergent drawer open so that residual water
can evaporate.
Summary of Contents for WAXH2KI0SN
Page 2: ...https digitalguide bsh group com mat no 9001660897 ...
Page 63: ......