Installation and connection
en
17
2.
When connecting to a 21 mm = ½"
tap, first fit the adapter with a seal-
ing washer.
3.
Open the water tap carefully and
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
▶
Secure the water outlet hose
against unintentional loosening.
Note:
Observe the draining heights.
The maximum draining height is
100 cm.
Siphon
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Sink
Fix and secure
the water outlet
hose with an el-
bow.
Plastic pipe with
rubber sleeve or
gully
Fix and secure
the water outlet
hose with an el-
bow.
4.7 Aligning the appliance
In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
1.
Loosen the lock nuts using a WAF
17 wrench by turning it in a clock-
wise direction.
Summary of Contents for WAXH2KI0SN
Page 2: ...https digitalguide bsh group com mat no 9001660897 ...
Page 63: ......