51
on the appliance:
for Standard and Aqua-Secure models
2.
Carefully turn on the tap and check that the connection points
are not leaking.
²
Screw connection is under water pipe pressure.
Water drainage hose
²
– Do not kink or protract the the water supply hose.
– Height difference between the placement area and drainage
point: 0–maximum 100 cm
Drainage into a wash basin
ã
Warning!
Water damage possible!
If the attached drainage hose slips out of the
washbasin due to high water pressure when draining
the washing machine, leaking water may cause
damage.
Secure the drainage hose to prevent it from slipping
out of the sink.
ã
Caution!
The appliance may be damaged.
If the end of the drainage hose is immersed in the
drained water, water may be drawn back into the
appliance!
– The plug must not be in the plug hole.
– When the water is being pumped out of the
washing machine, check that the water drains
away quickly enough.
– The end of the drainage hose must not be
immersed in the drained water!
Installing the drainage hose:
