33
²
When selecting your detergent and care product, follow the
instructions of the manufacturers. We recommend the use of
standard, universal and color liquid and gel-like detergents for all
machine-washable, coloured textiles made of cotton and
synthetic materials.
Ø
Use only self-flowing liquid products and gels which the
manufacturer recommends adding to a detergent drawer.
Ø
Do not mix different liquid detergents. If changing the liquid
detergent (type, manufacturer, ...), empty the dispenser
completely.
Ø
Do not use any solvent-based, corrosive or gas-emitting
products (e.g. liquid beach).
Ø
Do not mix detergent and softener.
Ø
Do not use any superimposed or highly thickened products.
Ø
To prevent product from drying, do not leave the fill cover
open for a long time.
In daily use
Ø
Illuminated displays on the drawer handle
– Display
is lit
if intelligent dosage is selected for the
dispenser. In the case of the combined container
i
/
w
the indicator light is lit for the stored container content
(
i
for softener/
w
for detergent).
– Display
flashes
if the fill level for the container is below
the minimum when intelligent dosage has been selected.
– Display
flashes briefly
when drawer has been inserted
correctly.
Ø
Selecting and deselecting intelligent dosage/adjusting
dosage strength
The intelligent dosage of detergent and softener is selected
in the factory for all permitted programmes.
Refer to
The dosage strength for detergent has been
preset to light (lightly soiled washing) and for softener to
medium (normally soft washing) and can be individually
changed for each programme.
Refer to
In addition to intelligent dosage, washing additives (e.g. stain
remover) can be added manually via dispenser
u v
.
²
The selection (on/off) of i-DOS
M
/
w
and i-DOS
w
is retained for
each programme until the next change occurs, even if the
machine is switched off.
