Sensors
en
51
Brightness
Possible setting values: 1 - 4
You can select position
3
and use the
˜
button to adjust the brightness of the
Touch-Display, e.g.
’
-
„
.
Possible setting values:
Switching the drum-care information
signal on/off
You can select position
4
and use the
˜
button to switch the
Û
Limp. tambor
(Drum Clean)
information signal on or
off, e.g.
š
-
‚
.
Possible setting values:
H
Sensors
Sensors
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Note:
Place large and small items of
laundry evenly in the drum.
2
Cleaning and
maintenance
Cleaning and maintenance
:
Warning
Risk of death!
There is a risk of electric shock if touch
live components.
Press the button
#
and pull out the
mains plug.
Caution!
Fire and explosion hazard!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
The appliance may be damaged!
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
appliance.
Do not use cleaning agents that contain
solvents.
1
not very bright
2
normal level of
brightness
3
bright
4
very bright
0
off
1
on
