background image

Buttons

 en

23

8 Buttons

The selection of programme settings depends on the programme that is set.

Button

Selection

More information

Start/Reload

¡

Start

¡

Cancel

¡

Pause

Start, cancel or pause the pro-
gramme.

SpeedPerfect

¡

Activate

¡

Deactivate

Activate or deactivate a shorter pro-
gramme duration.

Note: 

Energy consumption increases.

The washing result is not affected by
this.

AntiStain

Multiple selection

Select the type of stain.
The temperature, drum movement and
soaking time are all adjusted to suit
the type of stain.

⁠ i-DOS

¡

Activate

¡

Deactivate

¡

Basic dosage

Briefly press the button to activate or
deactivate the intelligent dosing sys-
tem for fabric softener   or liquid de-
tergent  .
Press the button for approx. three
seconds to set the basic dosage. 
→ 

"Intelligent dosing system",

Page 33

Finish in

Up to 24 hours

Set the programme end.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.

Temp. °C

 – 90 °C

Adjust the temperature in °C.

Spin Speed

 - 1400 rpm

Adjust the spin speed or deactivate
the spin cycle.
If   is selected, the water is drained
and the spin cycle is deactivated. The
laundry stays wet inside the drum.

⁠ 3 sec. (Child

Lock 3 sec.)

¡

Activate

¡

Deactivate

→ 

"Childproof lock", Page 32

Summary of Contents for WGG244A9GB





























































Reviews: