en
Installation and connection
20
5.
Connect the appliance to the
power supply
→
the electricity supply", Page 21
4.7 Connecting the appliance
Connecting the water inlet hose
1.
Connect the water inlet hose.
2.
Connect the water inlet hose to a
tap (26.4 mm = 3/4").
3.
Open the water tap carefully and
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
▶
Secure the water outlet hose
against unintentional loosening.
Note:
Observe the draining heights.
The maximum draining height is
100 cm.
Siphon
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Sink
Fix and secure
the water outlet
hose with an el-
bow
→
.
Plastic pipe with
rubber sleeve or
gully
Fix and secure
the water outlet
hose with an el-
bow
→
.