background image

en 

Childproof lock

36

13.13 Resuming the pro-

gramme when the pro-
gramme status is Rinse
Hold

Requirements

¡

Rinse Stop is activated. 
→ 

"Buttons", Page 27

¡

The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.

1.

Set the 

Spin

 programme or a pro-

gramme for draining the water. 
→ 

"Programmes", Page 28

2.

Press 

Start/Reload

.

13.14 Unloading the laundry

1.

Open the appliance door.

2.

Remove the laundry.

13.15 Switching off the appli-

ance

1.

Turn the programme selector to

Off

.

2.

Wipe the rubber gasket dry and re-
move any foreign objects.

3.

Leave the appliance door and de-
tergent drawer open so that resid-
ual water can evaporate.

14 Childproof lock

Secure your appliance against being
operated unintentionally using the
controls.

14.1 Activating the childproof

lock

Press and hold the two 

⁠ 

3 sec.

buttons for approx. 3 seconds.

a

The display shows 

⁠ .

a

The controls are locked.

a

The childproof lock remains active
even after the appliance has been
switched off and in the event of a
power failure.

14.2 Deactivating the child-

proof lock

Requirement:

 To deactivate the

childproof lock, the appliance must
be switched on.

Press and hold the two 

⁠ 

3 sec.

buttons for approx. 3 seconds.

a

⁠  goes out in the display.

Summary of Contents for WIW28502GB





























































Reviews: