Bosch WLK20261BY, Instruction Manual

Additional programme settings       

en

15

The maximum temperature that can be 

set depends on the programme which 

has been selected.
Overview of programmes 

~

 Page 12

Spin speed

Depending on the programme 

progress, you can change the spin 

speed (in rpm; revolutions per minute) 

before and during the programme. 
To do this, repeatedly press the 

corresponding button until the required 

setting is displayed.
Setting – – – : Rinse hold = without final 

spin, the laundry remains in the water 

after the final rinse. 
You can select "Rinse hold" to prevent 

creasing if the laundry will not be taken 

out of the washing machine immediately 

after the programme has ended.
Maximum spin speed depends on the 

programme and model.
Overview of programmes 

~

 Page 12

Ready in

The respective programme duration is 

displayed by selecting the programme.
The programme duration is 

automatically adjusted when the 

programme is running. Changes to the 

programme default settings or 

programme settings also change the 

programme duration.
Before starting the programme, the 

programme end (Ready in time) can be 

pre-selected in increments of one hour 

(h = hours) up to a maximum of 24 

hours. 
To do this, repeatedly press the 

corresponding button until the required 

setting is displayed.

Note:  

The programme duration is 

included in the selected Ready in time.

After the start, the preselected time e.g. 

8h

 is displayed and the time counts 

down to the start of the wash 

programme. The programme duration is 

then displayed, e.g. 

2:30

(hours:minutes).

Changing the preselected time:

You can change the preselected time 

before the start of the programme as 

follows:

1.

Select Start/

Reload

.

2.

Press the 

Ready in

 button 

repeatedly until the required number 

of hours is displayed. 

3.

Press the 

Start

/Reload button.

Adding laundry while the pre-selected 

time continues running:

1.

Select Start/

Reload

.

2.

The symbols  

YES

 and 

¼

 light up in 

the display panel. The washing 

machine door can be opened and 

laundry can be added.

3.

Close the washing machine door.

4.

Press the 

Start

/Reload button. The 

preselected time continues to run.

\

Additional programme 

settings

Add

it

ion

al

pr

ogr

amme 

set

ti

ngs

SpeedPerfect

For a shorter wash time with a 

comparable washing effect to the 

standard programme. 

Note:  

Do not exceed maximum load.

Overview of programmes 

~

 Page 12

EcoPerfect

For saving energy with a washing result 

comparable to that of the standard 

programme.