Replacement of parts
6 720 808 928 (2017/06)
55
8.3
Control valves
Refer to figure 64
▶ Ensure the appliance is fully drained.
▶ Disconnect the electrical connection/s [2] from the appropriate
control valve/s [1] (heating or hot water).
▶ Undo the connection pipes [3].
▶ To refit, follow the above in reverse. Ensure any seals that have been
disturbed are renewed.
Fig. 64 Control valve/s removal
8.4
Differential pressure control valve
Refer to figure 65
▶ Ensure the appliance is fully drained.
▶ Undo the sensing tube connection [3].
▶ Undo the connection pipes [1] and remove the differential pressure
control valve and pipe work [2].
Fig. 65 Differential pressure control valve assembly removal
Refer to figure 66
▶ Undo the connection pipes [5] and remove the differential pressure
control valve [4] from the upper and lower pipe work.
▶ Undo the sensing tube connection [6] on the differential pressure
control valve [4].
▶ To refit, follow the above in reverse. Ensure any seals that have been
disturbed are renewed.
Fig. 66 Differential pressure control valve removal
8.5
Circulating pump
Refer to figure 67
▶ Ensure the appliance is fully drained.
▶ Disconnect the electrical connection from the circulating pump [1].
– Use a flat bladed screwdriver to aid releasing the securing clip.
▶ Undo the connection pipes [2].
▶ Remove the circulating pump [1].
▶ To refit, follow the above in reverse. Ensure any seals that have been
disturbed are renewed.
Fig. 67 Circulating pump removal
6720808926-29.1Wo
3
3
1
2
1
2
6720808926-30.1W
o
1
2
1
1
3
6720808926-70.1W
o
6
4
5
6720808926-31.1W
o
2
1
Summary of Contents for Worcester Greenstar HIU
Page 65: ...6 720 808 928 2017 06 65 Notes ...
Page 66: ...6 720 808 928 2017 06 66 Notes ...