en
Troubleshooting
40
Fault
Cause and troubleshooting
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted.
The appliance uses condensation for the automatic
self-cleaning.
▶
Not a fault – no action required.
Water drain hose is not connected correctly.
▶
Ensure that the water drain hose is connected cor-
rectly.
→
"Connecting the water drain hose", Page 14
The programme does
not start.
Childproof lock is activated.
▶
"Deactivating the childproof lock", Page 34
You have not pressed
Έναρξη/ Προσθήκη ρούχων
.
▶
Press
Έναρξη/ Προσθήκη ρούχων
.
No programme set.
1.
"Setting a programme", Page 29
.
2.
"Starting the programme", Page 30
The length of the pro-
gramme changes dur-
ing the drying cycle.
The programme operation is optimised electronically.
This may change the programme duration.
▶
Not a fault – no action required.
Pumping noise.
Condensation pump active.
▶
Not a fault – normal operating noise.
Buzzing noise.
Compressor ventilation active.
▶
Not a fault – normal operating noise.
The drying time is too
long.
The base unit's filter is soiled.
▶
"Cleaning the filter system on the base unit",
Fluff filter is soiled.
▶
"Cleaning the fluff filter", Page 30
The ambient temperature is greater than 30 °C.
▶
Ensure that the ambient temperature is lower than
30 °C.
The ambient temperature is lower than 15 °C.
▶
Ensure that the ambient temperature is above 15
°C.
Insufficient air circulation at the appliance's installation
location.
▶
Ventilate the appliance's installation location.
Appliance air inlet is blocked.
▶
Ensure that the air inlet on the appliance is kept
clear.
Heat exchanger is soiled.