The Ministry in essence NL
If you want to avoid or abort the
cooling process, open the door.
Requirements
s The display shows after drying:
"end"
s or during use: .
2.
Open the appliance door.
3.
Reload or remove the laundry.
4.
Close the appliance door.
5.
Press Start/Refill .
1.
Open the door.
2.
Remove the fluff from the door.
12.6 Program Cancel
1.
on Start/Refill to press.
The cooling process starts automatically
after approx. 30 seconds and cools the
laundry with a rotating drum. If you
want to avoid or abort the cooling
process, open the door.
2.
Open the appliance door.
3.
3.
Remove the two-piece fluff filter.
12.7 Remove laundry
1.
Open the appliance door.
2.
Remove the laundry.
12.8 Switching off the device
▶
Turn the program selector on from to make.
12.9 Fluff filter
During drying, the fluff from the
laundry is collected in the fluff filter.
The fluff filter protects the device
from fluff.
Cleaning fluff filter
When the drying program is finished
or if the display shows a message
during use, clean the fluff filter.
Remark: If you do not clean the
device as described, the device
function may be impaired.
29
