en
Laundry
30
11 Laundry
11.1 Preparing the laundry
ATTENTION!
Objects remaining in the laundry may
damage the laundry and the drum.
▶
Remove all items from any pock-
ets in your laundry before using
the appliance.
▶
To protect your appliance and the
laundry, prepare the laundry be-
forehand.
– Empty any pockets
– Brush sand out of all collars and
pockets
– Close bed covers and cushion
covers
– Close all zips, Velcro fasteners,
hooks and eyes
– Tie cloth belts, apron strings,
etc. together or use a laundry
bag.
– Remove curtain hooks and lead
strips or use a mesh laundry
bag
– Use a mesh laundry bag for
small items of laundry, such as
children's socks
– Separate items of laundry and
shake them out, or observe the
programme description
– Spin the laundry before drying
operation
12 Basic operation
operation
12.1 Switching on the appli-
ance
Requirement:
The appliance has
been correctly installed and connec-
ted.
→
"Installation and connection",
▶
Turn the programme selector to a
programme.
12.2 Setting a programme
1.
Turn the programme selector and
set the required programme.
→
2.
If required, adjust the programme
settings.
12.3 Loading laundry
Note:
To prevent creasing, note the
maximum load for the programmes.
→
Requirements
¡
The laundry is prepared and sor-
ted.
→
¡
The drum is empty.
1.
Open the door.
2.
Place the laundry in the drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
12.4 Starting the programme
Requirement:
A programme is set.
"Setting a programme", Page 30
▶
Press
Start/
Reload
.
a
The display shows the programme
duration or the "Ready in" time.
a
After the programme has ended,
the display shows: "End" .
Note:
If "Hot" appears, the appli-
ance cools the laundry.
When "Hot" goes out, the laundry
has cooled down.
Summary of Contents for WQG24200SG
Page 40: ...en Cleaning and servicing 40 2 Clean the moisture sensor with a sponge ...
Page 49: ......
Page 50: ......
Page 51: ......