operation
en
31
12.5 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Requirement:
A programme has
started.
→
"Starting the programme", Page 30
1.
Press
Start/
Reload
.
The cooling process starts auto-
matically after approximately 30
seconds and cools down the laun-
dry while the drum is rotating. If
you want to avoid or cancel the
cooling process, open the door.
→
2.
Open the door.
3.
Add or remove laundry.
4.
Close the door.
5.
Press
Start/
Reload
.
12.6 Cancelling the pro-
gramme
1.
Press
Start/
Reload
.
2.
Open the appliance door.
3.
Remove the laundry.
→
12.7 Unloading the laundry
1.
Open the door.
2.
Remove the laundry from the
drum.
12.8 Switching off the appli-
ance
▶
Turn the programme selector to
Off
.
12.9 Fluff filter
During drying, fluff from the laundry is
collected in the fluff filter. The fluff fil-
ter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
clean the fluff filter.
Note:
If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Requirements
¡
The display shows the following
after drying: "End"
¡
or during operation: .
1.
Open the door.
2.
Remove the fluff from the door.
3.
Remove the two-part fluff filter.
Summary of Contents for WQG24200SG
Page 40: ...en Cleaning and servicing 40 2 Clean the moisture sensor with a sponge ...
Page 49: ......
Page 50: ......
Page 51: ......