Troubleshooting
en
41
16 Troubleshooting
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
Cause and troubleshooting
"Hot" and the drum
rotates.
Cooling process active.
1.
Not a fault.
2.
Do not change the programme during the cooling
process.
Note:
The cooling process takes up to 10 minutes.
You can continue to operate the appliance.
Humming noise.
Compressor active.
▶
Not a fault – normal operating noise.
The display goes out
and
Start/
Re-
load
flashes.
Energy-saving mode is active
▶
Press any button.
a
The symbol lights up again.
Fluff filter is soiled.
▶
"Cleaning the fluff filter", Page 31
The base unit's filter is soiled.
▶
"Cleaning the filter system on the base unit",
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
Appliance paused, but
the drum is rotating.
Cooling process active.
▶
Not a fault – no action required.
Creasing.
The load is too large.
▶
Observe the maximum load capacity of the
→
.
The laundry lies in the drum for too long after drying.
Summary of Contents for WQG24200SG
Page 40: ...en Cleaning and servicing 40 2 Clean the moisture sensor with a sponge ...
Page 49: ......
Page 50: ......
Page 51: ......