Cleaning and servicing
en
39
4.
Clean the opening with a soft,
damp cloth.
5.
Closing the base unit
Requirement:
The base unit is open.
"Opening the base unit", Page 37
1.
Insert the heat exchanger cover by
the handle.
2.
Close the lever for the heat ex-
changer.
3.
Close the maintenance flap.
15.3 Moisture sensor
The moisture sensor in this appliance
measures how damp the laundry is
during the drying cycle. The appli-
ance changes the duration of the
automatic programme depending on
the residual moisture in the laundry.
Cleaning the moisture sensor
Over time, residue from limescale,
detergents and care products can
build up on the moisture sensor.
Clean the moisture sensor regularly.
ATTENTION!
Hard or rough objects may damage
the moisture sensor.
▶
Do not use hard or rough objects,
abrasive cleaning products or steel
wool for cleaning.
Note:
If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
1.
Open the door.
Summary of Contents for WQG24200SG
Page 40: ...en Cleaning and servicing 40 2 Clean the moisture sensor with a sponge ...
Page 49: ......
Page 50: ......
Page 51: ......