en
Appliance care
40
2.
Pour a bottle of the original appli-
ance care product
→
and ap-
prox. 1 ½ litres of warm tap water
into the condensation container.
Hold the full condensation con-
tainer level so that no liquid spills
out.
3.
Insert the condensation container
so that it locks into place.
4.
Press
Start/ Reload
. The appli-
ance care programme starts and
an audible signal sounds.
After around 3 hours, the appli-
ance pauses the appliance care
programme and the remaining pro-
gramme duration flashes on the
display.
5.
Pull out the condensation con-
tainer horizontally and empty it.
6.
Add approx. 1 ½ litres of hot tap
water into the condensation con-
tainer.
Hold the full condensation con-
tainer level so that no liquid spills
out.
7.
Carefully tip and empty the con-
densation container horizontally in
order to remove any remaining ori-
ginal care product.
