Troubleshooting
en
47
Fault
Cause and troubleshooting
The appliance is not
working.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
Appliance paused, but
the drum is rotating.
Cooling process active.
▶
Not a fault – no action required.
Creasing.
The load is too large.
▶
Observe the maximum load capacity of the
→
.
The laundry lies in the drum for too long after drying.
1.
Remove the laundry from the drum as soon as the
drying programme has finished.
2.
Spread the items of laundry for cooling.
Unsuitable programme for the type of fabric.
▶
Set the suitable programme for the type of fabric.
→
Easy-Care fabrics are dried for too long.
▶
"Changing the dryness level", Page 25
.
▶
"Adjusting the dryness level", Page 25
Anti-Crease not activated.
▶
Activate the Anti-Crease function.
→
and programme
terminated.
Condensation tank filled.
1.
"Emptying the condensation container", Page 32
.
2.
"Inserting the condensation container", Page 33
3.
"Starting the programme", Page 30
Water drain hose is caught or jammed.
1.
Ensure that the water drain hose is not kinked or
trapped.
2.
Route the water drain hose without kinks.
Water drain hose is not connected correctly.
▶
Ensure that the water drain hose is connected cor-
rectly.
→
"Connecting the water drain hose", Page 14
Water drain hose is blocked.
▶
Rinse the water drain hose with tap water.
The filter for the condensation tank is soiled.
▶
Summary of Contents for WQG245AESN
Page 55: ......