en
Cleaning and servicing
44
ance changes the duration of the
automatic programme depending on
the residual moisture in the laundry.
Cleaning the moisture sensor
Over time, residue from limescale,
detergents and care products can
build up on the moisture sensor.
Clean the moisture sensor regularly.
ATTENTION!
Hard or rough objects may damage
the moisture sensor.
▶
Do not use hard or rough objects,
abrasive cleaning products or steel
wool for cleaning.
Note:
If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
1.
Open the door.
2.
Clean the moisture sensor with a
sponge.
17.4 Condensation container
filter
During drying, fluff from the laundry
gets into the condensation. The filter
in the condensation container pro-
tects the appliance from fluff.
Clean the filter for the
condensation tank.
The filter is cleaned automatically
when the condensation container is
emptied. Check the filter regularly
and clean the filter if it is dirty.
1.
Empty the condensation container.
→
2.
Remove the filter.
3.
Clean the filter under warm, run-
ning water or in the dishwasher.
Summary of Contents for WQG245AESN
Page 55: ......