Appliance care
en
41
15.7 Ending the intensive ap-
pliance care programme
1.
Add approx. 1 ½ litres of hot tap
water into the condensation con-
tainer.
Hold the full condensation con-
tainer level so that no liquid spills
out.
2.
Insert the condensation container
so that it locks into place.
3.
Press
Start/Reload
.
a
The appliance care programme is
resumed. "End" appears on the
display and a signal tone sounds
once the appliance care pro-
gramme has ended.
4.
Pull out the condensation con-
tainer, keeping it level.
5.
Empty the condensation container
→
6.
Insert the condensation container
so that it locks into place.
7.
Switch off the appliance.
→
"Switching off the appliance",
a
The appliance care programme
has been completed.
