16
Reversing the door - step by step
Tip:
To reverse your dryer door side:
▯
Use only T20 (Torx) type screw driver to remove and
reinstall door screws.
▯
Do not use any other tools to reverse the door (hinge
or latch).
1.
Rotate the program selector to
Off
, pull out power
supply plug and open the door fully.
2.
Remove the screws from the door and pull out the
door from the dryer.
3.
Put the door on the flat, smooth, but secured surface,
e.g. on a towel or dishcloth lying down on the floor or
table.
4.
Remove screws from the hinge insert and then remove
it from the door.
5.
Remove screws from the hook insert and then remove
it from the door.
6.
Follow the instructions at images bellow to unlock the
door ring.
7.
Remove the door from its ring and reverse the ring,
and then suit the door to the door ring.
8.
Follow the instructions at images bellow to lock the
door ring.
