c
@
c
c
c
ø
@
c
è*
*
è*
è*
è*
è*
è*
è*
cc
cc
cc
cc
c@
è*
è*
è*
è*
è*
cc
cc
cc
cc
c@
*
è*
è*
è*
è*
è*
c
ø
@
c
è*
è*
è*
è*
è*
è*
cc
cc
cc
cc
c@
è*
è*
*
a
a
a
Remove all accessories from
Do not operate the dryer if there
9
Technical data
ʠ
Dimensions (DxWxH)
60 x 60 x 85 cm
Weight
approximately 35 kg
Max. capacity
7 kg
Condensation container
approx. 4.2 l
Ambient temperature
5 - 35 °C
Connection voltage
220 - 240 V
Connected load
2025/2600 W
Fuse protection
10 A / 16 A
Product number
a
Rating plate or inside of the door
Production number
You can find the rating plate on the back of the dryer.
ʠ
Consumption rates
Specifications are average values established under normal
operating conditions. Fluctuations of up to 10 % are possible.
Spin speed in rpm
(residual moisture)
Drying time** in
min incl. 8 min
cooling time
Energy
consumption**
in kWh
Cottons 7 kg
10 A
16 A
10 A
16 A
Cupboard Dry*
1400
(approx. 50 %)
98
90
3.32
3.32
1000
(approx. 60 %)
117
106
3.92
3.92
800
(approx. 70 %)
138
120
4.48
4.48
Iron Dry*
1400
(approx. 50 %)
76
66
2.45
2.45
1000
(approx. 60 %)
91
82
2.94
2.94
800
(approx. 70 %)
106
96
3.43
3.43
Easy-Care 3.5 kg
Cupboard Dry*
800
(approx. 40 %)
42
40
1.16
1.16
600
(approx. 50 %)
53
45
1.45
1.45
*Test programmes according to DIN EN 61121.
**The values may diverge from those specified depending on over and
undervoltage, fabric type, composition of the laundry to be dried, residual moisture
in the fabric and the amount of the load.
Optional accessories
(order from the after-sales service using the order number)
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space. The dryer
must be
fastened on the washing machine with this connection set.
If the worktop of the washing machine is less than 544 mm deep, please consult the
after-sales service or your specialist retailer.
Platform
For improved loading and unloading. The basket located in the drawer can be used for
carrying laundry.
Built-under installation
A metal cover must be fitted by a specialist instead of the appliance's covering plate.
WTZ
11311
WMZ
20460
WTZ
10295
10
What to do if ...
If you cannot rectify a fault yourself, please contact our after-sales service. We will always find
an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can
be found in the enclosed
after-sales service
directory, or by calling one of these numbers:
–
GB
0844 8928979 (Calla from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
–
IE
01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to
O
(Off)
and remove the appliance plug from the socket.
ʠ
Start/
Stop indicator lamp does
not light up.
Mains plug plugged in?
Programme selected?
ʠ
no
/
p
(Container/Cleaning)
indicator lights up.
Empty container for condensation
a
see page 4
.
ʠ
no
/
p
(Container/Cleaning)
indicator light flashes.
Clean the fluff filter
a
see page 4.
Clean the air cooler, if required
a
see page 6.
ʠ
Dryer does not start.
Has the
Start/
Stop button been pressed?
Door closed?
Programme set?
ʠ
Programme terminated shortly
after the start.
Ambient temperature greater than 5 °C?
ʠ
Water is leaking out.
Make sure the dryer is level.
ʠ
The door opens by itself.
Push the door closed until you hear it engage.
ʠ
The required degree of dryness
was not achieved or the drying
time was too long.
Clean the fluff filter
a
see page 4.
Empty the container for condensation.
Ambient temperature higher than 35 °C
a
ventilate the
room.
Air inlet may be blocked
a
clear obstruction.
Unsuitable programme selected?
a
see page 7.
Dryer installed too closely to other objects? Provide
adequate air circulation.
Mains failure
a
Restart the dryer.
Fine layer of limescale on the moisture sensors. Clean the
sensors
a
see page 6
.
ʠ
Laundry damp.
Use the next drying programme up or use the timed
programme as a supplement
a
see page 7.
Warm laundry feels damper than it really is!
ʠ
The humidity in the room has
increased significantly.
Make sure the room is sufficiently ventilated.
Air inlet blocked?
a
Clear obstruction.
Make sure that the air cooler is inserted.
ʠ
One or more indicator lights are
flashing.
Clean the fluff filter and air cooler
a
see page 4/6
.
Check the installation conditions
a
see page 8.
Switch off, allow to cool, switch back on and restart the
programme.
ʠ
Power failure.
Remove the laundry from the dryer immediately and
spread it out. Heat may escape.
a
a
a
a
a
a
a
a
a
