c
@c
c
L
I
|
c
c
÷
@
c
+
@
+
@
L
a
+
c
+
|
c
a
a
a
V
S
9
Technical data
ʠ
Dimensions (DxWxH)
60 x 60 x 85 cm
Weight
approximately 35 kg
Max. capacity
7 kg
Condensate container
approx. 4.2 l
Ambient temperature
5 - 35 °C
Connection voltage
220 - 240 V
Connected load
2025 / 2600 W
Fuse protection
10 A / 16 A
Product number
Production number
Inside of door
The rating plate can be found on the back of the dryer.
Power consumption when switched off
0.10 W
Power consumption when ready for use (left-on mode)
1.00 W
Consumption values table
(The value on the label is achieved at the maximum heat setting.)
Programme
Spin speed which
is used for
spinning the
laundry
Duration**
Energy consumption**
L
Cottons
7 kg
3.5 kg
7 kg
3.5 kg
10 A
16 A
10 A
16 A
10 A
16 A
10 A
16 A
+
.
Cupboard
Dry*
1400 rpm
121 min
104 min
92 min
62 min
3.73 kWh
3.73 kWh
2.04 kWh
2.04 kWh
1000 rpm
144 min
123 min
85 min
73 min
4.40 kWh
4.40 kWh
2.41 kWh
2.41 kWh
800 rpm
170 min
139 min
112 min
82 min
5.03 kWh
5.03 kWh
2.76 kWh
2.76 kWh
|
Iron Dry *
1400 rpm
94 min
77 min
80 min
50 min
2.75 kWh
2.75 kWh
1.77 kWh
1.77 kWh
1000 rpm
112 min
95 min
91 min
61 min
3.30 kWh
3.30 kWh
2.13 kwh
2.13 kwh
800 rpm
130 min
111 min
103 min
73 min
3.85 kWh
3.85 kWh
2.53 kwh
2.53 kwh
I
Easy-Care
3.5 kg
3.5 kg
+
.
Cupboard
Dry*
800 rpm
42 min
40 min
1.16 kWh
1.16 kWh
600 rpm
53 min
45 min
1.45 kWh
1.45 kWh
*
Programme setting for testing in accordance with the applicable EN61121 standard.
**
The values may differ from those specified, depending on the type of fabric, composition of laundry to be dried, residual moisture in the
fabric and the amount of laundry being loaded.
Most efficient programme for cotton fabrics
The following "standard cottons programme" (identified with
) is suitable for drying normal, wet cotton laundry and is most efficient in
terms of its combined energy consumption for drying wet cotton laundry.
Standard programme for cottons in accordance with current EU regulation 932/2012
Programme
Load
Energy consumption
Programme duration
Cottons
Cupboard Dry
7 kg/3.5 kg
10 A
16 A
10 A
16 A
4.40 kWh/2.41 kWh
4.40 kWh/2.41 kWh
144 min/85 min
123 min/73 min
Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU.
Optional accessories
(from after-sales service using order number, depending on model)
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth to save
space. The dryer
must be
fastened on the washing machine with this connection set. If the worktop
of the washing machine is less than 544 mm deep, please consult the after-sales service or your
specialist retailer.
Platform
For easier loading and unloading. The basket contained in the drawer can be used to carry the
laundry.
WTZ
11311
WMZ
20500
10
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales
service. We will always find an appropriate solution and will avoid unnecessary visits by
engineers. Trust the expertise of the manufacturer and rest assured that the repair will be
carried out by trained service technicians using original spare parts. The contact details of your
local after-sales service can be found in the enclosed
after-sales service
directory, or by calling
one of these numbers:
–
GB
0344 892 8979 (Calls charged at local or mobile rate.)
–
IE
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to
Off
and remove the appliance plug from the socket.
ʠ
Ĕ÷
(
Start/
Stop) indicator lamp does
not light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ
The display panel light and
indicator lights
(depending on
model)
go out and the
Ĕ÷
(
Start/
Stop) indicator light
flashes.
Energy-saving mode is activated
a
see the separate
Energy-saving mode
instructions.
ʠ
//
.
/
Ä
(Container//Cleaning)
indicator lights up.
Empty container for condensation
a
see page 4
.
ʠ
//
.
/
Ä
(Container//Cleaning)
indicator light flashes.
Clean the fluff filter
a
see page 4.
Clean the air cooler, if required
a
see page 6.
ʠ
Dryer does not start.
Has the
Ĕ
(
Start/
Stop) button been pressed?
Door closed?
Programme set?
ʠ
Programme terminated shortly after
the start.
Ambient temperature greater than 5 °C?
ʠ
Water is leaking out.
Make sure the dryer is level.
ʠ
The door opens by itself.
Push the door closed until you hear it engage.
ʠ
The required degree of dryness
was not achieved or the drying time
was too long.
Clean the fluff filter
a
see page 4.
Empty the container for condensation.
Ambient temperature higher than 35 °C
a
ventilate
the room.
Air inlet may be blocked
a
clear obstruction.
Unsuitable programme selected?
a
see page 7.
Dryer installed too closely to other objects? Provide
adequate air circulation.
Mains failure
a
Restart the dryer.
Fine layer of limescale on the moisture sensors. Clean the
sensors
a
see page 6
.
ʠ
Laundry damp.
Use the next drying programme up or use the timed
programme as a supplement
a
see page 7.
Warm laundry feels damper than it really is!
ʠ
The humidity in the room has
increased significantly.
Make sure the room is sufficiently ventilated.
Air inlet blocked?
a
Clear obstruction.
Make sure that the air cooler is inserted.
ʠ
One or more indicator lights are
flashing.
Clean the fluff filter and air cooler
a
see page 4/6
.
Check the installation conditions
a
see page 8.
Switch off, allow to cool, switch back on and restart the
programme.
ʠ
Power failure.
Remove laundry from the dryer immediately and spread
out. This allows the heat to dissipate. Be careful as the
door, the drum and the laundry may be hot.
a
a
a
a
a
a
a
a
a
a
