en
Installation and connection
16
6.
Pull out the condensation container
fully.
7.
Turn the condensation container
180° onto its underside and remove
the stopper that is fitted.Turn the
condensation container back over
and insert the stopper into the
recess in the top of the
condensation container.
8.
Pull the filter out of the lock-in slot
and place it into the recess in the top
of the condensation container.
9.
Slide in the condensation container
until it clicks into place.
The condensation is now discharged via
the drain hose into the waste-water
system or into a wash basin
Note:
If you want to change the
condensation drain back to the
condensation container, carry out all
these steps in reverse order.