en
Installation and connection
14
During installation ensure that:
■
The dryer is placed on a clean, level
and firm surface,
■
The mains plug can be accessed at
all times,
■
The air inlet on the dryer is kept clear
and there is sufficient ventilation,
■
The area around the dryer is kept
clean and
■
The dryer is levelled using the
threaded feet.
Note:
Check the alignment of the
appliance with a spirit level and
correct if necessary. Change the
height by turning the appliance feet.
All appliance feet must stand firmly
on the ground.
Incorrect alignment may cause high
noise levels, vibrations and improper
movement of the drum.
Note:
If in doubt, have the appliance
connected by a specialist.
Optional accessories
Order optional accessories
*
from
the after-sales service:
■
Washer-dryer stack connection set:
To save space, the dryer can be
placed on top of a suitable washing
machine of the same width and
depth.
The dryer must be fastened to
the washing machine using this
connection set.
Order number with pull-out worktop:
WTZ11400
;
Order number without pull-out
worktop:
WTZ20410
.
■
Platform:
For easier loading and unloading,
raise your dryer with a platform.
Transport laundry with the clothes
basket integrated into the platform
drawer.
Order number:
WMZ20500
.
■
Basket for woollens:
Dry individual woollen items, sports
shoes and soft toys in the basket for
woollens.
Order number:
WMZ20600
.
Transport and frost protection
To empty the condensate container:
1.
Use the programme selector to
select any programme.
2.
Press the Start button.
3.
Wait for 5 minutes.
Note:
The condensation is drained.
4.
Empty the condensate container
again.
5.
Switch off the dryer.
Caution!
Any residual water may leak out
and cause material damage.
Transport the dryer in an upright
position.
* Depending on the model
Summary of Contents for WTG86400AU
Page 1: ...en Installation and operating instructions Tumble dryer WTG86400AU ...
Page 37: ...6 ...
Page 38: ...6 ...
Page 39: ...6 ...
