Bosch WTG865H2UC Use And Care Manual / Installation Instructions Download

Page: 31 / 48

Home Connect™

Home Connect™

This appliance is Wi-Fi-capable and can be remotely

controlled using a mobile device.
You can use the Home Connect app to do the following

on your appliance from your mobile device:

▯

Set up programs and start them.

▯

Adjust, activate and deactivate program settings.

▯

Query the status of programs.

▯

Adjust, activate and deactivate appliance settings.

▯

Switch off the appliance.

Before you can use the Home Connect functions, you will

need to carry out the following steps:

Install the Home Connect app on your mobile device.

Connect your appliance to your home network

automatically

manually (you only need to do this the

first time).

Connect your appliance to the Home Connect app.

You can find information about the app on our

Home Connect website www.home-connect.com
Home Connect services are not available in every

country. The availability of the Home Connect function

depends on the availability of Home Connect services in

your country. You can find information on this at:

www.home-connect.com

Notes

▯

Please observe the safety precautions in this

instruction manual and make sure that these are

complied with even when operating the appliance via

the Home Connect app while you are away from

home. You must also follow the instructions in the

Home Connect app.

▯

You cannot use the Home Connect app to make

changes while the controls on the appliance are being

operated. However, you can use the

Home Connect app to see any adjustments made

directly on the appliance itself.

Calling up the Home Connect menu

In the Home Connect menu, you can create and view

network connections, reset network settings, activate/

deactivate Wi-Fi and find other Home Connect functions.

Switch the appliance on.

Press and hold

Remote Start

for at least 3 seconds.

‘ž£

appears in the display.

You are now in the Home Connect menu.

Note:

Briefly press

Remote Start

to exit the Home

Connect menu.

Connecting to the home network and the

Home Connect app

Connect your appliance to the home network

automatically

manually

(you only need to do this the

first time).

Notes

▯

If your home network router has a WPS function, you

can connect the appliance to your home network

automatically.

▯

If your home network router does not have a

WPS function, you need to connect the appliance to

your home network manually.

You must then connect to the Home Connect app.

Note:

To connect your appliance to the home network,

Wi-Fi

must be activated on the appliance.

Wi-Fi

deactivated on the appliance by default and is activated

automatically when you connect your appliance to your

home network.

Connecting to your home network automatically
Step 2.1

Ensure that you are in the Home Connect menu.

Calling up the Home Connect menu; Page 31

Press

Start/Pause

The appliance now attempts to connect to your home

network.

flashes in the display.

Activate the WPS function on your home network

router within the next 2 minutes.

If the appliance has connected to your home network

successfully,

™©Ÿ

and

appear in the display and

light up continuously.

Note:

If you are not able to establish a connection,

check whether your appliance is within range of your

home network. Try connecting automatically again or

connect your appliance manually.

Summary of Contents for WTG865H2UC

















































Search results

Summary of Contents for WTG865H2UC

Reviews:

Related manuals for WTG865H2UC

Brands by name

Popular brands

Bosch WTG865H2UC, Use And Care Manual / Installation Instructions

Search results

Summary of Contents for WTG865H2UC

Reviews:

Related manuals for WTG865H2UC

Brands by name

Popular brands