en
Cleaning
32
9.
Put the filter mat back on.
Note:
Ensure that the filter mat is
not misshapen, torn or clogged.
Position the filter mat as shown
above.
10.
Check how dirty the dryer's heat
exchanger is before putting the
EasyClean filter back in. If it is very
dirty, use a vacuum cleaner with a
brush attachment to clean it carefully
from top to bottom.
Note:
Take care not to bend or
damage the fins on the heat
exchanger when cleaning it.
Caution!
Risk of injury.
You could cut yourself on the fins of
the heat exchanger.
Do not touch these with your hands.
11.
Slide the EasyClean filter in and
make sure it clicks into place.
12.
Close the maintenance flap.
13.
Switch the dryer off.
You have now cleaned the EasyClean
filter.
Note:
If your filter mat is damaged, you
can order a new one from the after-
sales service using part number:
12007650.
Contact information for all countries can
be found on the enclosed after-sales
service list.
